Product Overview
PM6008GSNL is my company indep -endent development of 60W PoE switch with LCD display, provides 8- 10/100/1000
Mbps RJ45 port, all ports support MDI/ MDIX function.Among them 1-4 ports have PSE function, using 4 twisted-pair cable to
the terminal equipment of power supply at the same time, the output power up to 60 W, complies with IEEE802.3 af/at
standard, can automatically detect identification standard of electrical equipment and through the cable power supply to
them. The LCD not only can display the PoE work status, accurate judgment port of load, can also help customer and engineer
timely discover and solve the network failure, improve work efficiency and quality.
Features
Interface information
- 8*10/100/1000Mbps RJ45 ports
- 4 PSE ports(port1~4)
PoE(Power over Ethernet)
- Complies with IEEE802.3af/at Power over Ethernet standard
- Supports PoE Power up to 60W for each PoE port
- Auto detect power device
- PoE Overload Alarm LED
- Remote power and Data feeding up to 100m
Switch
- Flow Control for Full Duplex operation and back pressure for Half Duplex Operation
- 8K MAC address, automatic address learning and address aging
- Support Energy-Efficient Ethernet (EEE) function (IEEE802.3az)
PoE Features
The PM6008GSNL can provide up to 60 Watts of power to attached devices, such as POS,PTZ cameras, WiMax, VoIP
phones, wireless access points, surveillance cameras etc, all over existing cat. 5cables. The switch eliminates the need
for individual power sources for devices in the network, saving on costs for power cables and avoiding power outlet
availability issues.
LCD Features
PM6008GSNL is with the function of the LCD display and PoE Ethernet switch. The LCD can display the working condition
of PoE port not only, still can accurately show the state of each port, such as: Output power, Overload, Short circuit, Light
load, Low voltage, Over voltage,High temperature, and so on...
Application
PM6008GSNL is an ideal solution for IEEE 802.3af/at and High Power IEEE 802.3at/4-pairs Power over Ethernet (PoE) application. it is designed specifically to satisfy the growing demand of higher power
consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / Speed Dome network cameras,
multi- channel (802.11a/b/g/n) wireless LAN access points and other network devices by providing double PoE power than
conventional 802.3at PoE currently.
Specification
Hardware information
|
Standard
|
IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3az, IEEE802.3x, IEEE802.3af, IEEE802.3at/bt
|
|
Network Media(Cable)
|
10BASE-T: UTP category 3,4,5 cable (≤100m)
100BASE-TX: UTP category 5,5e cable (≤100m)
1000BASE-T: UTP category 5e,6 cable(≤100m)
|
|
LED
|
PWR(Green) PoE (Orange)
LNK/ACT: 10/100M (Orange)1000M (Green)
|
|
LCD Display
|
Support
|
|
MAC Address Table
|
8K, Auto-learning, Auto-aging
|
|
Transfer mode
|
Store-and-Forward
|
|
Switching Capacity
|
16G
|
|
Dimensions (L*W*H)
|
280*179*44.5mm
|
|
Fan
|
Fanless
|
|
Power Input
|
AC: 100~240V, 50/60Hz
|
|
Power Output
|
55VDC /3.6A
|
|
Certification
|
CE,FCC ClassB
|
|
PoE(Power Over Ethernet)
|
|
PoE port
|
Port 1~4
|
|
PoE Power on RJ-45
|
Twisted-pair polarity: 1/2(-),3/6(+);and4/5(+),7/8(-);
|
|
PoE Power Output
|
Per port 55V DC Max. 60W
|
|
PoE Power Budget
|
180W
|
|
Environmental
|
|
Operating Temperature
|
0°C ~ 40 °C (32 °F ~104°F )
|
|
Storage Temperature
|
-40 °C ~ 70 °C (-40 °F ~158°F )
|
|
Operating Humidity
|
10% ~ 90% non-condensing
|
|
Storage Humidity
|
5% ~ 90% non-condensing
|
Power Supply information
|
Power Supply
|
PoE Power Budget
|
|
55V
|
180W
|
Ordering information
|
Model
|
Gigabit RJ45 Port
|
PSE Port
|
Internal Adapter
|
LCD Display
|
PoE Standard
|
|
PM6008GSNL-200
|
8
|
4
|
200W
|
Support
|
802.3af/
802.3at 4-pair
|
